Certifying Staff

        AMC-145.A.35 (c )Certifying and support staff - For the interpretation of “6 months of actual relevant aircraft maintenance experience in any consecutive 2-year period”, the provisions of AMC 66.A.20 (b) 2 are applicable.
       CAR-145.A.35 (n) Certifying and support staff - The holder of a category A aircraft maintenance licence may only exercise certification privileges on a specific aircraft type following the satisfactory completion of the relevant
category A aircraft task training carried out by an organisation appropriately approved in accordance with CAR-145.This training shall include practical hands on training and theoretical training as appropriate for each task authorised. Satisfactory completion of training shall be demonstrated by an examination or by workplace assessment carried out by the organisation
           AMC-145.A.35 (n) Certifying and support staff
1. It is the responsibility of the CAR-145 organisation issuing the certifying staff authorisation to ensure that the task training received by this person covers all the tasks to be authorised.
This is particularly important in those cases where the task training has been provided by an appropriately approved training organisation different from the one issuing the
authorisation.
2. “Appropriately approved means an organisation holding an approval to provide task training for the corresponding aircraft type.
           CAR-145.A.35 (o) Certifying and support staff
The holder of a category B2 aircraft maintenance licence may only exercise the certification privileges described in point 66.A.20 (a) (3) (ii) of CAR-66 following the satisfactory
completion of (i) the relevant category A aircraft task training and (ii) 6 months of documented practical experience covering the scope of the authorization that will be issued.         The task training shall include practical hands on training and theoretical training as appropriate for each task authorized. Satisfactory completion of the training shall be demonstrated by an examination or by workplace assessment. Task training and  examination  / assessment shall be carried out by the maintenance organization issuing the certifying staff authorization. The practical experience shall be also obtained within such maintenance organization.’
Salient Feature - CAR 145 Issue 2
Highlights 145.05,20 &25
Highlights 145.30
CAR 145 Issue 2

Comments

Post a Comment

Popular posts from this blog

Cessna 152 Magneto Check

MAGNETO CHECK. NEVER ADVANCE TIMING BEYOND SPECIFICATIONS IN ORDER TO REDUCE RPM DROP. Too much importance is being attached to RPM drop in single ignition. RPM drop on single ignition is a natural characteristic of dual ignition design. The purpose of the following magneto check is to determine that all cylinders are firing. If all cylinders are not firing, the engine will run extremely rough and cause for investigation will be quite apparent. The amount of RPM drop is not necessarily significant and will be influenced by ambient air temperature, humidity, airport altitude, etc. In fact, absence of RPM drop should be cause for suspicion that the magneto timing has been bumped up and is set in advance of the setting specified. Magneto checks should be performed on a comparative basis between individual right and left magneto performance. a. Start and run engine until the oil and cylinder head temperatures are in normal operating ranges. b. Advance engine speed to 1700 RPM. c. Tu...
Read more

Brake System Cessna 172

                             BRAKE SYSTEM -MAINTENANCE PRACTICES              1. Description and Operation A. The hydraulic brake system is comprised of two master cylinders, located immediately forward of the  pilot’s rudder pedals, brake lines and hoses, and single-disc, floating cylinder brake assemblies located at  each main landing gear wheel. B. The parking brake system is comprised of a pull-type handle and mechanical connections which are  linked to the rudder pedal assembly. Pulling aft on the brake handle applies mechanical pressure to the  rudder pedals, activating the brakes and locks the handle in place. Turning the handle 90 degrees will  release the parking brake and allow for normal operation through the rudder pedals. C. Brake operation is accomplished by pushing on the upper part of each rudder pedal. This motion i...
Read more

McCauley Propeller Installation fixed pitch

Image
Propeller Installation for all fixed pitch propellers (except 1A162 model propellers).                   WARNING: MAKE SURE THE MAGNETO IS GROUNDED BEFORE INSTALLING  THE PROPELLER OR CONNECTING EXTERNAL POWER.                NOTE: McCauley recommends that propeller mounting nuts (if applicable) be replaced at each  propeller installation, whenever possible. However, nuts may be reused providing the threads are in good condition and the locking material prevents turning of the nut on the  stud by hand. Propeller mounting bolts must be magnetic particle inspected in accordance  with ASTM E-1444 or replaced whenever the propeller is removed from the engine.                NOTE: The aircraft maintenance manual or STC installation instructions should always be  consulted for any specialized procedures applicable to a specific aircraft....
Read more